Crawler Drilling Machines Should Regularly Clean The Fuel Tank And Filter
The fuel tank and filter in the Crawler Mounted Drilling Rigs are very important components. It is necessary to clean the two parts regularly without stopping the chain during the use of the machine.
The impurities in the hydraulic oil of the crawler drilling machine will not only cause the hydraulic valve to malfunction, but also aggravate the wear of the hydraulic components such as the oil pump and the hydraulic motor. Therefore, we have installed the oil suction filter and the oil return filter on the structure to ensure as much as possible. The fluid is cleaned in the system. However, due to the wear and tear of hydraulic components during operation, the addition of hydraulic oil inadvertently brings in impurities, so cleaning the fuel tank and oil filter regularly is the key to ensure oil cleaning, prevent hydraulic system failure and prolong the life of hydraulic components.
1. The crawler type oil return oil filter is installed above the oil tank and communicates with the oil return pipe. When cleaning, it is only necessary to directly unscrew the filter element and rinse with clean diesel oil. The oil return oil filter should be cleaned once a month. If the filter element is found to be damaged, it should be replaced immediately.
2. The improved oil filter of the crawler drilling machine is installed under the oil tank and communicates with the oil suction port of the oil pump. Because of the self-locking function, the oil filter can automatically close the oil port without leaking after removing the filter element. Simply unscrew the filter element and rinse it with clean diesel. The oil suction filter should be cleaned once a month. If the filter element is found to be damaged, it should be replaced immediately.
3. The oil tank of the crawler DTH Drilling Rig is the intersection of oil absorption and oil return, and it is also a place where impurities are easily deposited and concentrated, so it should be cleaned frequently. The oil drain plug should be opened every month to remove some of the oil and flush out the bottom impurities. Clean it once every six months, release all the oil, and add new hydraulic oil after the tank is cleaned.